Fiberglass shower stalls will provide many years of use and enhance your bathroom.
These days, people are using fiberglass shower stalls due to its durability and aesthetic qualities. Due to this bathroom phenomenon, manufacturers are consistently improving the quality and the appearance of their shower stalls. Fiberglass shower stalls are more cost-effective and beneficial compared to glass shower stalls. They can take the family abuse, especially from kids.
Aside from these benefits, fiberglass shower stalls are also easier to clean. Of course the most important advantage of fiberglass shower stalls is its durability. Glass stalls would easily break with abuse, fiberglass shower stalls are tougher and more durable, plus lightweight.
The wide popularity of fiberglass shower stalls will cause manufacturers to compete on different levels of its features that are very beneficial to consumers. Lots of newer models are available for easy-installation. Installing fiberglass shower stalls is so easy that even those who do not have any experience can do it. Here are steps for installing fiberglass shower stalls.
1. Remove the old fiberglass shower stall first. Don’t hesitate to eliminate the repair of damaged hardware that may be caused by stress in weak material. Damaged hardware will cause problems in time, especially with abuse from kids.
2. Position the new fiberglass shower pan over the old one to ensure size compatibility. If the new pan is not compatible, find a good pan that fits. A good fitting pan made from the right material will prevent damage and endure over time.
3. Remove old drain pipes and clean any dirt build-up. Mark the position on the shower floor where you intend to place the new drain pipe. Afterwards, detach the shower pan, cut the hole, install the new pipes with its P-trap, then run it to the main drainage line. Your local store will have the hardware.
4. Fasten the hot and cold fixtures on their specified positions and place the pipe fittings inline with the fiberglass shower stall. Follow local codes when doing plumbing in your bathroom. You want the fixtures to be sturdy and durable. Don’t hesitate to ask questions at your local store for information on installing this hardware.
5. Test the plumbing for leaks by temporary placing the shower pan in position. When done, place insulation in the wall to minimize noise from the water. Repair any leaks before proceeding. This repair now will save easily on future damaged areas.
6 After mixing the mortar according to the manufacturer’s instruction, use it to seal the seams where the shower pan and the drain meet. You can buy the mortar at your local store and get any information you need about using the material.
7. After measuring the holes, cut them for the shower fixtures and head in the enclosure. When you are done applying adhesives around the panel’s edge and the wall studs, fasten the fiberglass enclosure panels. Seal the seams between the panels using good silicon caulk material.
8. Put water-resistant cement board on all the areas that rest above the panels. As much as possible, maintain a 1/8-inch gap between the stall walls and the board. Seal this with good caulk that is available at your local store.
9. Apply good silicon caulk on all areas that may cause leakage. When you are really sure that all areas are water-tight, you can now install the bath doors. If the material is damaged, don’t install them. Check with the store to find replacement doors. Even a slight crack will break under stress or pressure.
There are many different designs, styles and shapes of fiberglass shower stalls so get all the information you need before you purchase. Getting the correct hardware and material will save you days in stress over having the wrong shower. The market is big so you can choose from many designs.
Over the course of the project you constantly learn something each day that you are working. It can be a tough job if you don’t have the correct information that’s available for your installation. Do yourself a favor and search for good information on the hardware and material that you will be using. I strongly recommend that you search all the places that can help you with this information.
Fiberglass shower stalls will endure many years of use and have many modern styles,shapes and designs. Your family and especially the kids will love your new bath shower.
Also, your bathroom will be looking good and have lots of use in the future days by your family. As mentioned earlier this shower will endure many years of abuse and use.
For more information on the best fiberglass shower stalls